Final Pay Due Date Calculator for Australian Employers

Final Pay Due Date Calculator for Australian Employers
Table of Contents

Share at:

Everyone asks how much final pay is. The question that gets employers into trouble is when. Our free final pay due date calculator (below) answers it. Enter the last day of employment, how the job is ending and which rule applies to the final pay. It shows the date payment in lieu of notice is due, the deadline for everything else and whether your next pay run is soon enough, under the Fair Work Act rules as at 20 November 2026.

It doesn’t work out what you owe. For the amounts, use our Final Pay Calculator, then come back here for the dates.

When is final pay due in Australia?

There’s no single deadline. The Fair Work Ombudsman says the rule can come from an award, an enterprise agreement, the National Employment Standards (NES) or the Fair Work Act, and where the NES requires payment sooner, the NES wins. In practice, three rules cover almost every case.

SituationWhen it’s dueWhere it comes from
Payment in lieu of noticeOn or before the day the employment endsFair Work Act s 117(2)(b), part of the NES
Everything else, covered by a modern awardUsually no later than 7 days after the last dayThe award’s payment on termination clause
Everything else, covered by an enterprise agreementWhatever the agreement saysThe agreement
Everything else, no award or agreementAt least monthly. The Ombudsman’s best practice is as soon as possible, for example the next pay cycleFair Work Act s 323(1)(c)

Everything else” means wages up to the last day plus the other amounts the award or the NES requires, such as unused annual leave and leave loading and redundancy pay. The Fair Work Act requires you to pay out unused annual leave when employment ends (s 90(2)). It doesn’t name a day, so the day comes from the award or agreement. If you can pay everything on the last day, do it. That removes every timing question.

Your employment contract can set a date too. Follow the earliest date that applies.

What the 7-day award clause says

Most employers have heard “7 days”. It’s not a Fair Work Act rule. It’s a term in most modern awards, and the Ombudsman says most awards use it. Here’s the wording in the Clerks Private Sector Award 2020 (clause 17.5), which the General Retail Industry Award 2020 (clause 18.4) repeats:

The employer must pay an employee no later than 7 days after the day on which the employee’s employment terminates: (i) the employee’s wages under this award for any complete or incomplete pay period up to the end of the day of termination; and (ii) all other amounts that are due to the employee under this award and the NES.

Three things to notice. The clock starts the day after the employment ends, so a last day of Wednesday 25 November 2026 gives a deadline of Wednesday 2 December 2026. The clause counts calendar days and doesn’t move the deadline for weekends. And it’s subject to two exceptions: a further order of the Fair Work Commission (for example, a delay while an application to reduce redundancy pay is decided), and deductions the award or the Act authorises.

The calculator uses this standard 7-day rule when you pick “An award applies with the usual 7-day rule. It applies the typical clause, so find the actual clause in your award.

Awards that do it differently

  • Horticulture. Under the Horticulture Award 2020 (clause 16.3), wages up to the last day are paid in cash or by cheque on the day of termination, or posted by the next working day. If you pay by electronic funds transfer, it’s 7 days. Other amounts, such as annual leave, are due within 7 days either way.
  • Hospitality and restaurants. Casuals paid at the end of each engagement under the Hospitality Industry (General) Award 2020 (clause 23.6(b)) or the Restaurant Industry Award 2020 (clause 19.5(b)) must be paid the wages due under the award at the end of their last engagement.

If your award or enterprise agreement has its own rule, choose “An award or agreement with its own rule” and enter the number of days. Not sure which award covers you? The Ombudsman’s Find my award tool will tell you.

Why payment in lieu of notice can’t wait

If you end someone’s employment without making them work the full notice period, you pay the rest of the notice instead. The timing is stricter than for the rest of final pay. Section 117(2)(b) of the Fair Work Act says you must not terminate the employee’s employment unless you have paid the payment in lieu (Fair Work Act). The Ombudsman puts it plainly: pay it before or on the day of termination.

So the award’s 7 days doesn’t apply to it, and neither does your next pay run. If you’re paying notice in lieu on Wednesday, the money goes out by Wednesday, even if that’s an extra payment outside your normal cycle. This applies if you pay all of the notice or only part of it.

Our post on payment in lieu of notice explains what goes into it, and how much notice you owe covers the notice periods.

How the way employment ends changes the timing

How employment endsPayment in lieu of noticeFinal pay timing
Employee resignsNot owed by youAward, agreement or Act rule, counted from the last day of their notice
You end it and the employee works the full noticeNot neededAward, agreement or Act rule, counted from the termination day on your notice
You end it and pay notice in lieu (all or part)Due on or before the last dayAward, agreement or Act rule for everything else
Dismissal for serious misconductNot required (s 123(1)(b))Award, agreement or Act rule. Amounts still owed, such as unused annual leave, are still paid
Fixed-term, task or season ends on its agreed endGenerally not required (s 123(1)(a))Award, agreement or Act rule, counted from the end date

The notice rules in section 123 have limits. The fixed-term exclusion doesn’t apply if a substantial reason for using the arrangement was to avoid the notice and redundancy rules (s 123(2)). For redundancy, pick whichever of the two “you end it” options matches how you’re giving notice. Redundancy pay is one of the “other amounts” and follows the final pay timing. Our posts on termination for misconduct and redundancy pay for small business cover the other side of those two situations.

Is your pay cycle fast enough?

This is where the 7-day rule catches people. A monthly pay run can land weeks after the last day. A fortnightly run can miss the deadline by a few days. Add your next regular pay day to the calculator and it tells you whether that run is on or before the deadline. If it isn’t, you make an extra payment by the deadline instead of waiting.

With no award or agreement rule, the Act sets no day, and the calculator can’t call a pay run late. It shows how many days after the last day your next run falls, and flags anything beyond a month, because the Act requires pay at least monthly.

Final pay due date calculator worked examples

Each example is the calculator’s own output for the dates shown.

Example 1: pay in lieu, 7-day award, pay day too late

You end an employee’s job and pay all the notice in lieu. The termination takes effect on Wednesday 25 November 2026. Your award has the usual 7-day rule and your fortnightly pay day is Friday 4 December 2026.

WhatDue by
Payment in lieu of noticeWed 25 November 2026
Wages to the last day and all other amounts dueWed 2 December 2026

Your pay day is 2 days after the deadline. Run an extra payment by Wednesday 2 December. The notice payment goes out by 25 November whatever the pay cycle says.

Example 2: resignation, deadline on a Saturday

An employee resigns and their last day is Saturday 12 December 2026. The 7-day award rule applies and your next pay day is Friday 18 December 2026.

The deadline is Saturday 19 December 2026. There’s no pay in lieu. Your pay day is 6 days after the last day, so it’s on time. The calculator also notes that the deadline is a Saturday, so you plan to pay by Friday 18 December. Public holidays aren’t considered.

Example 3: resignation, no award or agreement

An employee resigns with no award or agreement covering them. Their last day is Friday 11 December 2026 and your next pay day is Friday 18 December 2026.

The calculator shows “No set day”. The Act requires pay at least monthly, and paying on 18 December, 7 days after the last day, matches the Ombudsman’s next pay cycle example.

Example 4: serious misconduct, an agreement with a 3-day rule

You dismiss an employee for serious misconduct and their last day is Monday 30 November 2026. Your enterprise agreement says final pay is due within 3 days.

The deadline is Thursday 3 December 2026. There’s no payment in lieu of notice, because section 123(1)(b) takes serious misconduct out of the notice rules. Anything the employee is still owed, such as unused annual leave, is paid by 3 December.

What this calculator doesn’t do

  • It doesn’t work out how much you owe. Use the Final Pay Calculator for the amounts, or read what to include in an employee’s final pay.
  • It doesn’t check your actual award, enterprise agreement or contract. Awards differ, as the examples above show.
  • It doesn’t time long service leave. State and territory laws can require it on the last day or shortly after, and some awards say so in a note. Our long service leave calculator covers the entitlement.
  • It doesn’t consider public holidays, and it doesn’t extend a deadline for a Fair Work Commission order.
  • It doesn’t time super. Under Payday Super, from 1 July 2026 the employee’s fund must receive super within 7 business days of payday (ATO). Our post on super on termination payments has more.

Frequently asked questions

How long do you have to pay final pay in Australia?

It depends on the award or agreement. Most modern awards require final pay no later than 7 days after the last day of employment. If there’s no award or agreement rule, the Fair Work Act requires pay at least monthly. Payment in lieu of notice must be paid on or before the day the employment ends.

Is the 7-day rule for final pay in the Fair Work Act?

No. The 7-day deadline is a term in most modern awards. The Fair Work Act itself only requires employers to pay at least monthly, apart from the rule that payment in lieu of notice is due on or before the termination day.

When must payment in lieu of notice be paid?

Before or on the day of termination. Section 117(2)(b) of the Fair Work Act says an employer must not terminate unless it has paid the payment in lieu, so it can’t wait for the next pay run.

Does the 7 days count weekends?

The standard award clause says no later than 7 days after the day employment terminates. It counts calendar days and doesn’t move the deadline for weekends, so plan to pay on the last weekday before it.

Is final pay due on the last day if the employee is dismissed for serious misconduct?

Payment in lieu of notice isn’t required for serious misconduct, because the notice rules don’t apply (s 123(1)(b)). Wages and the other amounts the employee is owed, such as unused annual leave, still follow the award, agreement or Act timing.

Know the date before the last day

The amounts are arithmetic. The dates are where employers slip. One payment is due by the last day, the rest by a deadline that depends on the award, and a pay run that looks normal can still land too late.

Run each departure through the Final Pay Due Date Calculator above when you set the last day, not after it. Then pay on the earliest date it shows. For the amounts, use our Final Pay Calculator.

Get your Full Time Employment Agreement legal document for free.

Hire your employees and protect your business with our full time employment agreement.

This article is general information only and isn’t legal advice. Rules are as at 20 November 2026 and can change, so check your award or agreement and the Fair Work Ombudsman, and get advice for your situation.

Share at:

Simplify creating legal documents today

Browse through Lawpath's AI tools which can be used to draft, review and refine legal documents today!

Related Articles

When Can an Employee Be Immediately Dismissed?

When Can an Employee Be Immediately Dismissed?

Difficult employees can be one of the hardest things for small businesses to deal with. Learn when employees can be dismissed without notice or warning.
Employee Employer Probation

Can I Extend An Employee’s Probation Period?

Still unsure about a new employee? Want to extend their probation period just in case? So long as your contract allows it, you're allowed to extend it for as long as you'd like! Keep in mind, however, that if you're thinking about a possible dismissal, the probation period is not the only thing to consider.

What Rights Do You Have If You’ve Been Stood Down?

Have you recently been stood down by your employer? Find out key information including what a stand down means and how it will affect you.

How to Effectively Manage Change in Your Business

Managing change within a business can be a difficult and daunting process. Read on to find out ways you can ensure a smooth transition.

How Have Insolvency Laws Changed Since 1 January 2021?

New insolvency laws have been in effect since 1 January 2021. Find out in this article what the new rules are.
What is an Ombudsman?

What is an Ombudsman?

An ombudsman can help you if you have a complaint about a business or government agency. Read on to learn about the processes involved in having your issue heard.

3 Legal Traps You Could Fall Into When Using Contractors

Different legal issues can arise when hiring contractors. Find out in this guide what they are and how you can avoid them.

A Guide to Individual Flexibility Arrangements

What are individual flexibility arrangements? Why are they important? Find out here what the legal requirements are for your workplace.